The high-performance precision planetary gearbox with helical teeth for a particularly quiet drive.
PX是高精度行星减速机和高效轴承科技的完美结合。
具有独特短小尺寸,免维护等设计
借助高精度的斜齿,其运行十分稳定均匀,且比一般的减速机都要安静。
专为需要在保证高转速的同时达到最优性能的应用情况而设计。
Our PLM is the ideal combination of precision planetary gearbox and efficient bearing technology. It has been developed specifically for delivering the maximum performance at high speeds. Its helical teeth provide homogeneous synchronism and quiet running noise.
适合42步进
50-100W伺服电机
可提供短期交货服务。
高精度:齿隙低于5弧分。
齿轮材料选用高级低碳合金钢,使用自动化高温渗碳淬火处理。
齿轮精度控制在ISO5级以下。确保减速机高效(90%以上)和长寿命。
采用专业轴承设计结构,实现高负载,高扭矩和高刚性。
采用专业齿轮技术,降低齿轮啮合冲击和噪音。
可适配全球任何一台伺服电动机。
使用合成润滑脂,并采用IP65密封设计,不泄漏免维护。
Provide short term delivery service.
High precision: backlash ≤5 arc-min.
Top low carbon alloy steel as gear material, adapting automatic carburizing and quenching heat treatment.
The gear preicision can be controlled below grade ISO 5. Ensure high efficiency (above 90%) and long lifetime.
High loading capacity, hight torque and high rigidity achieved by adapting professional bearing design structure.
Reduce the gear meshing impact and noise by adapting professional gear technology.
Can be connected with any servo motor around the world.
No grease leakage and miantenance free by using synthetic lubricating grease and IP65 protection design.